Aircrack Wifi Hack Mac

Mar 10, 2020  To use those, or Aircrack-ng on the Mac, you need to install them using MacPorts, a tool for installing command-line products on the Mac. But actually hacking wifi practically is much easier with a good wordlist. But this world list is of no use until we don’t have any idea of how to actually use that word list in order to crack a hash. And before cracking the hash we actually need to generate it. So, below are those steps along with some good wordlists to crack a WPA/WPA2 wifi. Mar 26, 2014  Wi-Fi Crack allows you to crack any wireless network with WEP security. Powered by AirCrack-NG, the popular, cross-platform, wireless security cracking command-line tool, Wi-Fi Crack you a takes you step-by-step through process of cracking the security of a WEP-based wireless network using a beautiful OS X graphical user interface. Jul 28, 2017  If you don’t have the beacon or the handshake, it will fail accordingly. For wordlists, see below. As I said, aireplay-ng doesn’t work on a MacBook Pro. The catch is that aireplay-ng can do a lot of other things besides deauth attacks. You might read that airport cards do not support packet injection, but packet injections are for WEP attacks and nobody uses WEP anymore. Tell aircrack-ng to begin cracking the password. Enter the following command, making sure to use the necessary network information when doing so: aircrack-ng -a2 -b MAC -w rockyou.txt name.cap. If you’re cracking a WPA network instead of a WPA2 network, replace “-a2” with -a. Replace “MAC” with the MAC address you found in the last.

If you want to know how to hack WiFi access point – just read this step by step aircrack-ng tutorial, run the verified commands and hack WiFi password easily.

With the help a these commands you will be able to hack WiFi AP (access points) that use WPA/WPA2-PSK (pre-shared key) encryption.

The basis of this method of hacking WiFi lies in capturing of the WPA/WPA2 authentication handshake and then cracking the PSK using aircrack-ng.

How to hack WiFi – the action plan:

  1. Download and install the latest aircrack-ng
  2. Start the wireless interface in monitor mode using the airmon-ng
  3. Start the airodump-ng on AP channel with filter for BSSID to collect authentication handshake
  4. [Optional] Use the aireplay-ng to deauthenticate the wireless client
  5. Run the aircrack-ng to hack the WiFi password by cracking the authentication handshake

1. Aircrack-ng: Download and Install

The Latest Version Only: If you really want to hack WiFi – do not install the old aircrack-ng from your OS repositories. Download and compile the latest version manually.

Install the required dependencies:

Download and install the latest aircrack-ng (current version):

Ensure that you have installed the latest version of aircrack-ng:

2. Airmon-ng: Monitor Mode

Now it is required to start the wireless interface in monitor mode.

Monitor mode allows a computer with a wireless network interface to monitor all traffic received from the wireless network.

What is especially important for us – monitor mode allows packets to be captured without having to associate with an access point.

Find and stop all the processes that use the wireless interface and may cause troubles:

Start the wireless interface in monitor mode:

In the example above the airmon-ng has created a new wireless interface called mon0 and enabled on it monitor mode.

So the correct interface name to use in the next parts of this tutorial is the mon0.

3. Airodump-ng: Authentication Handshake

Cool Tip: Want to have some “fun”? Create a Linux fork bomb! One small string that is able to hang the whole system! Read more →

Now, when our wireless adapter is in monitor mode, we have a capability to see all the wireless traffic that passes by in the air.

This can be done with the airodump-ng command:

All of the visible APs are listed in the upper part of the screen and the clients are listed in the lower part of the screen:

Start the airodump-ng on AP channel with the filter for BSSID to collect the authentication handshake for the access point we are interested in:

OptionDescription
-cThe channel for the wireless network
--bssidThe MAC address of the access point
-wThe file name prefix for the file which will contain authentication handshake
mon0The wireless interface
--ignore-negative-oneFixes the ‘fixed channel : -1’ error message
Now wait until airodump-ng captures a handshake.

If you want to speed up this process – go to the step #4 and try to force wireless client reauthentication.

After some time you should see the WPA handshake: 00:11:22:33:44:55 in the top right-hand corner of the screen.

This means that the airodump-ng has successfully captured the handshake:

4. Aireplay-ng: Deauthenticate Client

Cool Tip: Want to stay anonymous? Learn how to use PROXY on the Linux command line. Read more → /hack-wep-network-mac.html.

If you can’t wait till airodump-ng captures a handshake, you can send a message to the wireless client saying that it is no longer associated with the AP.

The wireless client will then hopefully reauthenticate with the AP and we’ll capture the authentication handshake.

Send deauth to broadcast:

Send directed deauth (attack is more effective when it is targeted):

OptionDescription
--deauth 100The number of de-authenticate frames you want to send (0 for unlimited)
-aThe MAC address of the access point
-cThe MAC address of the client
mon0The wireless interface
--ignore-negative-oneFixes the ‘fixed channel : -1’ error message

Cool Tip: Need to hack WiFi password? Don’t wast your time! Use “John the Ripper” – the fastest password cracker! Read more →

5. Aircrack-ng: Hack WiFi Password

Unfortunately there is no way except brute force to break WPA/WPA2-PSK encryption.

To hack WiFi password, you need a password dictionary.

And remember that this type of attack is only as good as your password dictionary.

You can download some dictionaries from here.

Crack the WPA/WPA2-PSK with the following command:

OptionDescription
-wThe name of the dictionary file
-bThe MAC address of the access point
WPAcrack.capThe name of the file that contains the authentication handshake

Cool Tip: Password cracking often takes time. Combine aircrack-ng with “John The Ripper” to pause/resume cracking whenever you want without loosing the progress! Read more →

Aircrack-ng is a wireless security software suite. It consists of a network packet analyzer, a WEP network cracker, and WPA / WPA2-PSK along with another set of wireless auditing tools. Here are the most popular tools included in the Aircrack-ng suite:

  • Airmon-Ng: converts your wireless card into a wireless card in a promiscuous way
  • Airmon-Ng: captures packages of desired specification, and t is particularly useful in deciphering passwords
  • Aircrack-Ng: used to decrypt passwords — able to use statistical techniques to decipher WEP and dictionaries for WPA and WPA2 after capturing the WPA handshake
  • Aireplay-Ng: can be used to generate or accelerate traffic in an access point
  • Airdecap-Ng: decrypts wireless traffic once we the key is deciphered

Main features:

  • Support for WEP, WPA/WPA2-PSK passwords
  • Fast WEP and WPA password decryption
  • Packet sniffer and injector
  • Ability to create a virtual tunnel
  • Automated WEP key password recovery
  • Password list management

If you want to know how to hack WiFi access point – just read this step by step aircrack-ng tutorial, run the verified commands and hack WiFi password easily.

With the help a these commands you will be able to hack WiFi AP (access points) that use WPA/WPA2-PSK (pre-shared key) encryption.

Aircrack Wifi Hack Mac Os

The basis of this method of hacking WiFi lies in capturing of the WPA/WPA2 authentication handshake and then cracking the PSK using aircrack-ng.

How to hack WiFi – the action plan:

  1. Download and install the latest aircrack-ng
  2. Start the wireless interface in monitor mode using the airmon-ng
  3. Start the airodump-ng on AP channel with filter for BSSID to collect authentication handshake
  4. [Optional] Use the aireplay-ng to deauthenticate the wireless client
  5. Run the aircrack-ng to hack the WiFi password by cracking the authentication handshake

1. Aircrack-ng: Download and Install

The Latest Version Only: If you really want to hack WiFi – do not install the old aircrack-ng from your OS repositories. Download and compile the latest version manually.

Install the required dependencies:

Download and install the latest aircrack-ng (current version):

Ensure that you have installed the latest version of aircrack-ng:

2. Airmon-ng: Monitor Mode

Now it is required to start the wireless interface in monitor mode.

Monitor mode allows a computer with a wireless network interface to monitor all traffic received from the wireless network.

What is especially important for us – monitor mode allows packets to be captured without having to associate with an access point.

Find and stop all the processes that use the wireless interface and may cause troubles:

Start the wireless interface in monitor mode:

In the example above the airmon-ng has created a new wireless interface called mon0 and enabled on it monitor mode.

So the correct interface name to use in the next parts of this tutorial is the mon0.

3. Airodump-ng: Authentication Handshake

Dungeon siege 2 mac download. Cool Tip: Want to have some “fun”? Create a Linux fork bomb! One small string that is able to hang the whole system! Read more →

Now, when our wireless adapter is in monitor mode, we have a capability to see all the wireless traffic that passes by in the air.

This can be done with the airodump-ng command:

All of the visible APs are listed in the upper part of the screen and the clients are listed in the lower part of the screen:

Start the airodump-ng on AP channel with the filter for BSSID to collect the authentication handshake for the access point we are interested in:

Now wait until airodump-ng captures a handshake.

If you want to speed up this process – go to the step #4 and try to force wireless client reauthentication.

After some time you should see the WPA handshake: 00:11:22:33:44:55 in the top right-hand corner of the screen.

This means that the airodump-ng has successfully captured the handshake:

4. Aireplay-ng: Deauthenticate Client

Cool Tip: Want to stay anonymous? Learn how to use PROXY on the Linux command line.

If you can’t wait till airodump-ng captures a handshake, you can send a message to the wireless client saying that it is no longer associated with the AP.

The wireless client will then hopefully reauthenticate with the AP and we’ll capture the authentication handshake.

Send deauth to broadcast:

Send directed deauth (attack is more effective when it is targeted):

Aircrack Wifi Hack Mac Download

Cool Tip: Need to hack WiFi password? Don’t wast your time! Use “John the Ripper” – the fastest password cracker! Read more →

5. Aircrack-ng: Hack WiFi Password

Unfortunately there is no way except brute force to break WPA/WPA2-PSK encryption.

To hack WiFi password, you need a password dictionary.

And remember that this type of attack is only as good as your password dictionary.

You can download some dictionaries from here.

Crack the WPA/WPA2-PSK with the following command:

Hope this article helpful for you. Thank You

Indian Cyber Army Make IT Secure

Enjoy…Stay Happy…Stay Secure…